Oil Level Sensor Pin In Wiring Harness

[utvols99]

Can anyone tell me which pin in the firewall wiring harness connector

is destined for the oil level light ?

The motor in this '94 ES300 was replaced with 1MZFE from a Camry

and there is no oil level sensor on the new motor. Additionally, there

is no connector on the wiring harness (which must have come with

the other motor), so I need to connect the pin in the harness to ground,

but I don't know which pin it is. Does anyone know or have a service

manual for that year model (94) ES300 that would have the pinout ?

Thanks !

[JPI]

Can anyone tell me which pin in the firewall wiring harness connector

is destined for the oil level light ?

The motor in this '94 ES300 was replaced with 1MZFE from a Camry

and there is no oil level sensor on the new motor. Additionally, there

is no connector on the wiring harness (which must have come with

the other motor), so I need to connect the pin in the harness to ground,

but I don't know which pin it is. Does anyone know or have a service

manual for that year model (94) ES300 that would have the pinout ?

Thanks !

←

I would use the wiring harness from your lexus. Transfer the oil pan over and you set to go.

JPI

[utvols99]

←

I would use the wiring harness from your lexus. Transfer the oil pan over and you set to go.

JPI

←

Would be the perfect plan if this had been done by the folks who swapped the

motor (b4 my time).

[ArmyofOne]

←

I would use the wiring harness from your lexus. Transfer the oil pan over and you set to go.

JPI

←

Would be the perfect plan if this had been done by the folks who swapped the

motor (b4 my time).

←

www.discounttoyotaparts.com

OIL PAN, ES300, Lower - 3.0L 1994 $114.10

can probably be had at a junkyard for cheaper... hope this helps.