Jump to content

bobbyt

Regular Member
  • Posts

    7
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Lexus Model
    rx300

bobbyt's Achievements

Explorer

Explorer (4/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. ok I had the year wrong its a 99. Here is my original post."My daughter has a 99 rx 300 and i have just replaced all 6 ignition coils, plugs, and both ocv valves. Now i get codes 1300,1305,1310,1315,1320,1325 and 1349. I had to rotate the bank 1 ocv shaft 180 degrees to make it run half way decent. Miss fires on 1,3,5 if i dont. Could my timming be 180 out? At my wits end! Please help if possible! ". Took it to a local mechanic and he says I need a new engine. It actually ran better before I replaced the 6 coil packs even though 2 were bad.
  2. 2001 rx 300 works fine if I give it a little gas but if I push the pedal down it acts like its flooding out and cant get over 45miles an hr.. The car sputters and you have to let off the gas. Could this be a throttle control problem?
  3. Car runs fine if I barley give it gas but if I push the pedal it acxts like it starts flooding and barely wants to run. starts jumping and stuttering unless i barely push the pedal.could this be a throttle position sensor? Help please!
  4. started with the ocv in the front. I think it was a 301 code. Haven't replaced the timing belt. About to put it in the shop and see if they can fix it. I have replaced almost every sensor on this thing! I am chasing a ghost here. Seems like i replace one thing and that code goes away but 5 morwe come up. Will let everyone know the outcome. Ok. The mechanic said I need a new motor! Please some one tell me he is wrong!
  5. started with the ocv in the front. I think it was a 301 code. Haven't replaced the timing belt. About to put it in the shop and see if they can fix it. I have replaced almost every sensor on this thing! I am chasing a ghost here. Seems like i replace one thing and that code goes away but 5 morwe come up. Will let everyone know the outcome.
  6. My daughter has a 99 rx 300 and i have just replaced all 6 ignition coils, plugs, and both ocv valves. Now i get codes 1300,1305,1310,1315,1320,1325 and 1349. I had to rotate the bank 1 ocv shaft 180 degrees to make it run half way decent. Miss fires on 1,3,5 if i dont. Could my timming be 180 out? At my wits end! Please help if possible!
×
×
  • Create New...

Forums


News


Membership