scgold

The round barrel type device is I believe the horizontal alignment. To get at the low beam vertical alignment,you must remove two screws and a clear plastic cover, the problem is, how to get the plastic cover off. The bubble gauge is under the clear plastic cover and appears to be ajustable for setting the vertical alignment.

Have a 94 sc400 and would like to vertically align the low beam headlights. Can't seem to remove the clear plastic covers on the bubble gauges. Any help would be appreciated.

Trying to locate the micro-computer for memory seat function. The two position switch in the drivers door is connected to this computer for setting the drivers seat,steering wheel and outside mirrors to individual drivers posistions. Also the light bulbs for the glove box and the license plate lights have been replaced but still do not work. The fuse,s check out ok, anyone have a similiar problem and solution. Thanks in advance.

The rpm gauge has quite working in my 94sc400. Has anyone had similiar problem and know the solution? Could this just be a loose cable if so where are the connection points located. Thanks in advance.

TOM, Is it available from pep boys ect.

Are there any products that can be used to fasten the inside portion of the antenna to the rear window. Original application looked like a kind of putty which did not harden and was still plyable. DO not want a permanent seal.

B) greetings from a new member. its great to know that lexus owners have such a trouble shooting resource available, especially one that is current and real time. my question concerns the horizontal/vertical gauges for the headlights. had the lexus dealer do a headlight adjustment but later found these gauges still not level per the owners manual. closer examination found a series of fine scratches under a couple of the lights. the original paint surface was scratch free prior to this experience. are these gauges supposed to be level per spec.? also 12 cd changer in trunk has a lit eject button stuck in the eject position any thoughts on unsticking this button. regards, scgold