usvi

Hey, I have a 1996 Lexus Es300. Every morning when I get in my car, I have to wait for the rev to drop to 1000 rpm or lower before the car goes in gear. I usually have to sit and wait a few minutes before it finally goes in gear. But once it goes in gear it shift smooth with no issues whatsoever. Would a sensor cause this? or do i have serious transmission problems? thanks

can anyone tell me their opinions between these two brands. 96 Es300 thanks

how do these compare to each other in quality? Where can I get bilstein struts from? I keep reading about the bilstein HD but all i find is the bilstein touring edition thanks

what are you guys opinion on these struts. Or do you have any other suggestions. thanks

what year es300 and other lexus/toyota share the same crank pulley? thanks

If my memory serves me, The filter is located in the middle of the front side of the engine, Open the hood and look down behind the fan. thank you very much everyone

Can someone tell me or show me a pic of where the oil filter is located. thanks

or does any other toyota/lexus use the same springs?

I was looking online for some lowering springs for a 96 ES300. And one of them said in the Applications IS300. So, are the IS300 and ES300 springs interchangeable? thanks

ehy, did you make those?

would tail lights from a 011 ES300 fit a 96 ES? thanks

thanks, does 97 models us different springs?

:(

a 1" drop will not !Removed! you wheels out. Try find a good company that makes a spring in that range. I dropped two of my cars around 2" and tires never stuck out. Once you know how to change your springs orstruts you can do it yourself and take somewhere to align after. But, I also dropped another one of my cars 2.25" and had minimal inside wear (never took it to align so that might have been the problem). I see no reason why a 1" drop will make the wheels look like the pic. Plus I live around alot of hills and sharp corners roads. But this car might be different

all those stuff are not necessary for the 1 inch drop that he wants. Better handling as well.

Where can I get some drop springs for a 1996 ES300. Im looking for something like 1.25" - 1.5" drop. something not too low. I just don't like the feeling around corners. I liked the tokico spring/strut combo on my friends accord... REAL smooth. anything like this available for my ES300? mostly finding from 97+ models, will they work on mines? for the 96 model i can only find SPRINT lowering springs, are these any good as well? but the drop is too low anyway. thanks B)

is a 97 ES300 springs different from a 96? I have a 1996 but can only find springs for a 1997+

thanks, i found the culprit! It was a bad CV Axle. I changed the axle and transmission fluid and now the problem is gone :) B)

any more opinions and suggestions :cries:

how much transmission fluid does a 1996 ES300 hold?

is it hard or possible for push button start on my 96 ES300? does the chipped key cause a problem? thanks

I have a 1996 ES300, and when i hit 40mph the wheel start to shake. But when i loose the accelerator or press brakes it stops. at times it even click like the axle is bad when going up hill. what can be my problem? someone told me the CV axle might be bent, is that even possible? thanks

thanks alot, im looking for some oem wheels... what other model will fit my es300? i'm looking for 17's, 18's or 19's thanks

does the LS 460 factory have the same bolt pattern as a 96 ES300? thanks