Jump to content


spenav

Regular Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by spenav

  1. Be careful with the ecm. I was told by a reputable mechanic that the dealership must "scan it" after installation or else it won't work. Do some research on that before investing the money.
  2. Has anyone any experience with a code P1351--vvt circuit range fault. Before I take it to lexus, I would like to know if there is anything I can do to fix it. Thanks.
  3. Thanks for the reply. I will give that a try. So far it is still driveable and holding pretty good.
  4. I broke the long bolt that hold the rear brake caliper and half of it is still in the cylinder. the car (RX300) is still driveable but don't know how to get it out. Any advice?
  5. I had apply throttle body cleaner liberally on the throttle but I did not open the black cap where the connector is. How do I check that the electronics have not been damaged? Would I need to replace the spark plug since I gap them? Thanks for the help. KBRX330 I have attached the picture of the part I cleaned. Are you referring to that plug on top when you say electronics or the black piece that attaches up front? Thanks.
  6. I had apply throttle body cleaner liberally on the throttle but I did not open the black cap where the connector is. How do I check that the electronics have not been damaged? Would I need to replace the spark plug since I gap them? Thanks for the help.
  7. Thanks. I am going to start there.
  8. I changed all six spark plugs and cleaned the IACV yesterday and the car won't start ever since. The engine turns but dies off right away. I used NKG Iridium plugs. Could gapping them cause the problem? How do I troubleshoot short of redoing the whole painful process all over again? Any help will be greatly appreciated.
×
×
  • Create New...

Forums


News


Membership