Jump to content


aridlc

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Everything posted by aridlc

  1. WOW...the brain can be a dangerous thing when you overthink things.... thanks homemechanic for mentioning the pcv valve..when i went to check it I bumped a ground wire bolted to the intake and found it to be loose. tightened and now she purrs like a kitten again.....the only problem now is somehow while doing all my checks the ABS light came on a stays on not letting me shift...also the speedometer doesn't work code shows speed sensor malfunction....tried to clear them and came back....forgot to mention when i tightened to ground wire the tranny codes disappeared.
  2. thanks for the response, I will have to check to plenum gasket and pcv valve as you stated. I jumped out the fuel filter this morning and it is pumping fine. I took off the jumper and still pumps. Reconnected fuel filter and made sure it was flowing through it. I guess the next step will be the fuel regulator once I locate it and check the over things you stated. One other thing now when the key is on and the brake is depressed I can't get the car to go into gear. ABS light is on when key is on and doesn't go out. Just something else to figure out. Maybe a fuse.
  3. ok, I have a what is probably a stupid question but here goes. I am at wits end with my 99 es300, the car turns over, try's to start but won't. I cleaned the iac, no help. I unplugged the fuel line from the fuel filter, tried to start to see if fuel comes out and none did. I took off the fuel filter and you can blow through it easily. I checked to see if any fuel would come out of the line after i took off the fuel filter by turning the car over and none would. Is this a sign that the fuel pump is bad and should I attempt to jump it out. I am able to get it to start by spraying starting fluid in the intake. The car ran once today for about 5 min. then just shut off. I am having codes showing but the are all tranny codes p753,p758,p1760 and i wouldn't think they would prevent the car from starting.
  4. I have a 99 es300 and I am currently experiencing a no start problem. This all started when the cel came on and I had the code read, p1760 overrun clutch solenoid valve. Isn't this a transmission code and why would this prevent me from starting the car? The car turns over and tries to crank but will not stay running. Did get it to run a couple times but jerked and died after about a half mile. I have searched this and over sites for similar issues to no avail. Someone plz help. P.S. tried to reset codes but came back.
  5. I am having the same problem did you find a fix?
  6. I have a 99 lexus es 300 with 92500 miles on it, I have a problem, when stopped & idling no matter whether in park, drive,etc. the car just shuts off. it will crank right up but then the check engine light and trac off light is on. When this happens the car is sluggish to drive. I took it to autozone and had the codes read. 4 codes p0753, p0758, 1656, 1760. Does anyone know what this might mean and is my tranny on it's way out. The car runs and shifts perfectly when reset. It has done this 3 times in 2 days. help
×
×
  • Create New...

Forums


News


Membership