Do Not Sell My Personal Information Jump to content

TREVORAMES

Regular Member
  • Content Count

    6
  • Joined

  • Last visited

Community Reputation

0 Neutral

About TREVORAMES

  • Rank
    New Club Member
  • Birthday 06/10/1968

Profile Information

  • Lexus Model
    RX300
  1. Is it the opinion of all the mechanics out there that only Lexus parts will work, and in my case the sensors. I have replaced both sensors front and by fire wall with after market ones (BECK/ARNLEY). The wiring connections seem correct however I am still getting codes 1153 1133 after installing them along with mis firing and very sluggish response. Does this mean I need to dig deep and replace both now with Lexus parts? I would appreciate any help. Thanks
  2. Is it the opinion of all the mechanics out there that only Lexus parts will work, and in my case the sensors. I have replaced both sensors front and by fire wall with after market ones. The wiring connections seem correct however I am getting code 1153 1133 still. Does this mean I need to dig deep and replace both now with Lexus parts? I would appreciate any help. Thanks
  3. I could use a copy. Thanks for the info.
  4. I bought the beck/arnley one from Autozone because it was $200 less the the Bosh. I took the old sensor off cut the sensor off of the line and then just connected the new sensor to the old housing wires. Simple enough I thought. Why would this be a problem?
  5. Replaced the sensor on the manufold, and reset the system. Code P1135 is still coming up and just for fun code P0125 has also come up. Does this mean that the sensor after the cat has gone now? Anyone any suggestion. I will also check the connections I made with the sensor, I bought the after market one from autozone $180, I used the old connector and just spliced into the lines.
  6. Does any know how to fix a P1135 Code? It is a Air/Fuel Ratio Sensor Heater Circuit Malfunction Bank 1 Sensor 1. Please help
×
×
  • Create New...