Jump to content


tiggere77

Regular Member
  • Posts

    13
  • Joined

  • Last visited

Everything posted by tiggere77

  1. <_< Hi to all...anyways i replaced my fuel rails on my 95sc300 and i did everything by the book as far as dicompressing the fuel lines and all that. so i put it back together and now the darn thing wont start,it cranks but it does not burn! if anyone out ther knows what to do about this problem pleas help me out thankyou. i have been trying to figure this out for weeks,went over and over everythin it could be but still the same...wont start.
  2. one more thing,would you happend to know where i can find the tool to get that crankshaft bolt out i need something to hold the crankshaft. <_<
  3. :) ok buddy thanks again for your help,i would start it tommorrow i'll let you know how it turns out.thanks
  4. my camshaft and my crankshafts pullys line up but not the timing belt,should i take off the timing belt completly and reinstall because i only took off what i needed to?could the timing belt be slipping?
  5. thankyou soooo much for your help i'll keep on trying i kinda like know how my car works and i think it could be the timing belt because the teeth marks mist by like two or three teeth,i when to auto zone and rented the compression testing kit but i will install the timing belt again untill i get it right.thanks again :)
  6. hi i have an sc300 its a 95 and the engine on these cars are a non-interfirence engine which means if the timing belt does break it would not harm the engine at all,it would just leave you stranded somewhere.
  7. Well, could be a hundred things. Have you checked for compression? Is the timing correct? Is there simply something not plugged in? Compression check it, tell ya lots again B) i will check compression i was thinking that yesterday,but if i dont have compression should i just get rid of it instead of keep wasting money on it? '
  8. hi all i have an sc300 95 i have two exhuast valves on #6 cylinder bent cuz a sparkplug broke and fell in there so i took off the head and took it to the machine shop and had it fix.the i put the engine back together and the engine rotates like its goin to start but it doest start.does anyone have an idea of what i could have done wrong?thanks richar
  9. you probably have a bad altenator you should take it out and let auto zone check it out for you.
  10. hi i was wondering if anyone here knows how to calibrate a tps i took it off my sc300 and now the car has very low rpms and shakes and turns off? :chairshot:
  11. thank you guys for helpin me with my sc300 but now i took 2 codes for the car that said 25 and 26 something about air-fule running rich but does anyone know how to fix this? :cries: :cries:
  12. hi iam new here but anyways this is the problem i have an sc300 95model i love this car and i will keep it for ever and ever but one day my brother wash the engine and the car started to shake alot so i replaced the wires and the spark plugs myself.and the car now shakes and stalls,has low rpms and engine turns on,so i checked the engine and it gives me a code 31 which indicates airflow meter right. OK so i go to the junkyard and get an airflow meter off a 92 sc300 i put it on and my baby is still doing the samething except that the engine light does not turn on but still shakes and very low rpms and i dont want to drive the car like this because i know it will stall on me in the middle of the road somewhere so what do i do help me please i dont want to take it to the stealer. thanks richard :cries:
×
×
  • Create New...

Forums


News


Membership