Jump to content

tigerpilot

Regular Member
  • Posts

    10
  • Joined

  • Last visited

Everything posted by tigerpilot

  1. Thanks...I'll look for it this weekend. I guess that you guys recommend O.E. parts.
  2. Hi Folks... Need some help. Getting P0135. This indicates is a faulty O2 sensor, specifically, Heater Circuit Malfuntion. The O2 sensor in question is located at Bank 1 Sensor 1. Here's the question. My Lexus manual says it's the sensor located just behind the radiator in the exhaust manifold. (Super easy to get at.) Others say... This is the O2 sensor that is between the firewall and the engine. (Tough to get at.) I changed the one by the radiator with a "generic" sensor and after about 25 miles the CEL came back on. Do you think I changed the correct sensor and if so...are these generic sensors just 'junk?' Thanks....
  3. Hi Folks... Need some help. Getting P0135. This indicates is a faulty O2 sensor, specifically, Heater Circuit Malfuntion. The O2 sensor in question is located at Bank 1 Sensor 1. Here's the question. My Lexus manual says it's the sensor located just behind the radiator in the exhaust manifold. (Super easy to get at.) Others say... This is the O2 sensor that is between the firewall and the engine. (Tough to get at.) I changed the one by the radiator with a "generic" sensor and after about 25 miles the CEL came back on. Do you think I changed the correct sensor and if so...are these generic sensors just 'junk?' Thanks....
  4. Is there a new model ES coming out soon? I thought someone said Spring '06. We're ready to buy but willing to wait for something new. Happy New Year!
  5. I read somewhere that there is going to be a newly designed ES330 early next year (2006). Can anyone confirm? We're waiting for the '06 models to arrvie next week but....if there is going to be something really new in 6 months, we'll wait. Thanks
  6. I can get the wipers to park near or at the bottom of the wind screen by removing the wiper arms and repositioning them on the shafts. However, they seem to 'bottom' and then go up about an inch. I'm wondering if I installed the wiper arm 'link' in the right position or maybe there isn't any right position. Also I don't think the drivers wiper is covering the entire screen like it did before I changed the motor. I did try both positions on the winter/summer switch. I guess the main question is "Is there a correct position for the wiper arm link when changing the wiper motor."
  7. I had to install a rebuilt wiper motor on my '96. I'm having a problem with the blades parking correctly. I've re-positioned them 'a million' times. Wondering if the blade 'link' has to be installed on the motor shaft in any particular position??? II know about reversing the plug to get the blades to park in a slightly higher/lower position but that isn't the problem. I don't think I'm getting the full wiper stroke and the wipers kind of bottom out and then go about an inch higher when parking. Thanks Much...
  8. How do I get the wiper link off of the old wiper motor so I can install the bebuilt motor?????? '96 ES300
  9. I also need the key programming instructions for my '96 ES300 Thanks, Don don@tigerpilot.com
  10. I have a 1996 ES300. I want to add keyless entry. I'm told it is about an 1-1.5 hour job for a DIY. The kit is about $50 US. Located in US-Florida. I was wondering if any you folks here have attempted this and have any suggestions? Regards, Don
×
×
  • Create New...

Forums


News


Membership