billydpowell

Regular Member
  • Content Count

    1,644
  • Joined

  • Last visited

  • Days Won

    33

Posts posted by billydpowell


  1. as a NEW member, the FIRST thing you need to do is SEARCH other people's steering problems, this has been covered for years.

    there are even videos showing you how to fix it.. THEN if you dont understand, ask for help.

    a 5 cent garden hose washer will fix it (usually). see videos.. 

    2 screws to remove the covers, then 3 screws to remove the plate and you are looking at it.

    tilt.jpg

    • Like 1

  2. OK, never mind , I got it all fixed... removed all the plastic housings on the right side, actually just used the air intake to swivel it up out of the way,

    and removed the bolt holding the OCV in its chamber, slid it up and washed it out with WD40 top clean it out, reassembled it and went for a drive,

    and in less than a mile the lights went out and it was running like always....  not a bad days work for a almost 85 year old guy...

    of course I am very tired and will expect much pain tomorrow, but it didnt cost anything but work.. and I didnt know I could do it.. MLK closures 

    forced me into action...  Oh I did split one vacuum hose that I will need to replace (it is too short to trim down).

    Below is my old shop I owned for 30 years.... I retired in 96, at 62 years old, and that was 23 years ago... 

    024.JPG


  3. On 9/16/2005 at 4:57 PM, chrisnisbet said:

    I have a couple of 'spare' parts that were left in the trunk of the car when I bought it a while ago, and I can't find where they are meant to go.

    One says F/L and the other says R/R, so I assume they go front left and right rear.

    The part numbers are:

    F/L: 67774-50020

    R/R: 67775-50030

    I've attached a picture of them.

    Does anyone have any idea where they go?

    Cheers.

    post-16550-1126907848_thumb.jpg

    you are right. they go in the "POCKET" on the doors as a trim panel at the top.. glue them in..