Jump to content

jwb007

Regular Member
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • Lexus Model
    1900 LS400

jwb007's Achievements

Advancing

Advancing (2/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. http://www.lexuspartsnow.com/parts/lexus-valve-assy-water~87240-50050.html http://www.ebay.com/itm/GENUINE-LEXUS-LS400-WATER-VALVE-ASSY-87240-50050-/221152920956 http://www.toyodiy.com/parts/p_E_1995_LEXUS_LS400_UCF20L-AEPGKW_8716.html
  2. Hi,hope all is well with you and yours. i really need your help.i owned a '90 LS400.The key-less entry doesn't work,after replacing then battery.(i took a month to actually replace the battery)I was then told that i need to reprogram the system, in order for it to work. i followed your instructions for the above steps. This "Rom" piece was attached to the module by a single screw.There are two wires runs from the Rom and connects to a harness independently.On the Module they are: Female connection and a gray wired that runs on its own. I can take pics for further clarification. I am unsure what i need to "pull out and re-set" from this Module. Now, the trunk latch wouldn't unlock with the ignition key after i manually locked it.any other suggestions.
  3. If the problem with the PS pump is only leakage, as is typical, you only need an overhaul kit and very few parts from that. There is a fluid pressure control valve that is the usual source of the fluid leak and replacing the seals in that is all that is really needed. WWest- These seals on the PCV are a dealer only part? What are the actual names? thank you.
×
×
  • Create New...

Forums


News


Membership