Jump to content


Mr_dpark

Regular Member
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Mr_dpark

  1. I installed aftermarket HID lights in my girlfriends new IS250, and Im getting water condensation on the inside of the headlight on the drivers side. The only thing I could think of to be causing this problem is that I drilled a hole on the rear cover to run the wires. But I dried out the headlight, and patched the hole as best I could with tape. It still gets water build up though. The passenger side is perfectly fine even with the drilled hole exposed. The only other problem i can see is that the windshield wiper fluid is on the drivers side right next to the headlight.....but with the hole closed up, I dont see what the problem is. i didnt take apart the headlight or anything, so what am I missing? Back when I had a civic, I took apart the headlight to put in clear corners, and it had water condensation when i would wash the car, but it would dry out on its own. With the lexus, it wont dry out on its own, even when the hole was exposed. Has anyone had this problem or heard about this problem. Im running out of ideas and any help would greatly appreciated. Thanks
×
×
  • Create New...

Forums


News


Membership