Jump to content


othater

Regular Member
  • Posts

    7
  • Joined

  • Last visited

Everything posted by othater

  1. Have you received them? I saw this one too, but the buyer wants me to buy in quantity. If you can direct me where to buy in small quantity, I would appreciate it very much. I would also try it if it fit. Thanks! Have you tried to install FC-280PT-20150 yet? Does this motor work well for replacing FC-280PC-22125? Please post your results. Thank you. Actually the 20150 has the shaft on the wrong end. The good thing is the plastic cap is correct with the correct connector. I'm going to try to use this cap for the new brushes. You can search on ClubLexus for replacement of the brushes. I will post if it works. The cap works great. Door locks working again. The motor is from Ebay (activesurplus) is the way to go for the brush replacement. You don't have to buy fifty. He has a auction for a pair. The only thing to remember is to take the old bushing out of the old cap and put it in the new cap. I updated TRD911's post on Clublexus forum also.
  2. Have you received them? I saw this one too, but the buyer wants me to buy in quantity. If you can direct me where to buy in small quantity, I would appreciate it very much. I would also try it if it fit. Thanks! Have you tried to install FC-280PT-20150 yet? Does this motor work well for replacing FC-280PC-22125? Please post your results. Thank you. Actually the 20150 has the shaft on the wrong end. The good thing is the plastic cap is correct with the correct connector. I'm going to try to use this cap for the new brushes. You can search on ClubLexus for replacement of the brushes. I will post if it works.
  3. Do a search for door lock actuator, You can purchase a new one for $2-300.00 or if you can fine the little motor (FC-280PT-22125) that is currently hard to find, you can rebuild the actuator. There are a couple of members looking for the motors including myself but the companies only sell in large quantity.
  4. Have you received them? I saw this one too, but the buyer wants me to buy in quantity. If you can direct me where to buy in small quantity, I would appreciate it very much. I would also try it if it fit. Thanks! I haven't received them yet, coming from Canada. Some bad news, another member notified me that the shaft is on the wrong side , but said I should be able to use the brushes to rebuild the old one :) . Will see??
  5. On another forum stated he orderd the FC-280PC-22125 and they were wrong. So I still need one more. I'm trying a different one FC-280PT-20150, same size, a little less torque, no collar. Might be a good replacement since the 22125 is so hard to find. The seller said people are buying them for the door actuator. Will see when I receive them. You do need to remove the coupling from the old motor shaft and replace the coupling on the new shaft. This was not easy but check this link out, there's a ton of info on how to do this in this thread, post #214 has a good picture. Basically you need to support the coupling so you can pound the shaft out of the center of the coupling using a shaft of smaller diameter. That's the hard part. The easy part is using a vise to push it on the new shaft. http://www.clublexus.com/forums/gs-second-...ors-diy-15.html
  6. I added a Dice electronics IPOD intergration kit which runs through the factory 6-disc CD. There are others companies that have the same setup.
  7. Lexuseng, Since you have replaced the motor in the actuator, do you need to leave the the sleeve on the shaft of the new one or do you remove it before you add the gear from the broken one. The reason is I can't find model Mabuchi FC-280PT-22125 for sale anywhere which has the ring/sleeve, but I found Mabuchi FC-280PC-22125 which has the same specs without the sleeve/ring/collar (sorry-dont know the correct name). Thanks for your help.
×
×
  • Create New...

Forums


News


Membership