dadsls400

wouldnt the cps ignight the check engine light? Thanks for your input..

I tried that to no result, thanks for the suggestion guys. Let me define "stumble" its just like a cylinder comes and goes, i doesn't miss, its just like it struggles then cleans up, then struggles again

Hey all, i just replaced my engine comp(after waiting nearly a year before i could find a used one for a 94 at my local salvage yard.) brought it home,installed it, started car up& it ran perfect, no cel,no trac light.I was stoked,took it for a 20 mile drive no problems at all, i thought it was all good,so i went and fueled it up,(premium) leaving the station i accelerated & it stumbled like it did before the computer issue,but no cel, no trac light just stumbled let off the pedal slightly it runs perfect. I drove it some more then noticed it is very intermittent sometimes it does it sometimes it does not. I think some of the problem i had before is resolved with the new computer(before the cel and trac lights would come on with any acceleration & car would buck)Now it is once again drivable,but not smooth like it should be,or like it was when i first replaced computer..Anyone have any solution to where to look? Again, no cel,no lights at all& car idles perfect. Also, to the floor it accelerates just fine,it seems to be just one place during acceleration it has the "stumble" problem Thanks in advance, Skip BTW both tps sensors And mass air meter are new,thanks to my other comp giving codes saying they were the problem @ $800

BUMP!!!

Hello, I have a 94 ls400, with 150+k on it. I have never really had any problems with it, until now. The trac light stays on and when you give it just a Lil too much throttle, it will cut out. Until you let off the pedal. The check engine light comes on when it cuts out, then stays on briefly before going out.. I followed the directions on how to scan the trac comp, and the engine comp. The engine codes are, 41 and 47,(41tps signal, 47sub tps signal) the trac code is 47(tps signal) So, I replaced the tps's reset the comp. and wham o!!!!!! still exactly the same.... This did not fix the problem!!! it just cost $300 bucks for nothing! I don't know what to do now. HELP!!!!!! Thanks, Frustrated & broke! Skip