LEXDOGG

My car starte to overheat toay. I had steam comming from the passager side. I looked but I cant see a hose that would be leaking. Is there a hose somewhere behind the motor? I am sure hoping that the head isnt cracked :( :( :(

My shifter handle is worn out. The sun killed it thanks to arizona heat. The leather is thrashed on it. Does anyone know how to remove it? Also, does anyone know where to get one? My car is a 91 thx,lexx

I had the same problem and i changed the control arm bushings an no luck. then I changed the struts and still no luck. I finally looked uner the front end an I noticed that my swaybar mount bushings were trashed! I changed them and the noise was gone. i spent 200 bucks in patrs and come to find out it was $15 bushings So check your swaybar bushigs Lexx

Ok I finally fixed my car after running around all day and trying to work my regular job. I found a mass air flow meter here in phoenix for $175. I put it on and still the same problems. i looked down by the powersteering pump and "BAM" 2 wires(white and red) was starring me right oin the face cut. I pulled half of my car apart on the passanger side to see where the wires went. low and behold, it was the cam position sensor. I mad my manager drive to the lexus dealer and by me another one. I got a 20% discount on the part, so it ended up costing me $111.00. I put that part on and she now purs like new again;)So I ended up spending about $300 today that I didnt need to spend. that money was going into my speed boat :( the only good thing is that my laxbaby is well again;) Thank you for the help guys;) Michael

Does anyone know where to get a mass air flow sensor cheaper than a dealer. Michael

I just started up my car and I unplugged the mass airflow sensor and the idling characteristics performed a little better. When I pluged the sensor plug back in the rough idle came in immediately. I am really thinking the mass airflow meter is junk. I was reading some books at work(autozone) and it states that some vehicles intergrade the intake air temp sensor in the mass airflow meter as well. Michael

Ok I looked up the codes on the net and I found them. Now my next question is where do I start? this is what the codes mean. code 13-Rpm signal code 24-Intake air temperature signal code 31-Airflow meter signal(vacume sensor signal) Can someone please help??????? :( :( thx Michael

Hey guys, I was driving today and all of a sudden my 91 ls started sputtering and dieseling. If I nail the gas it does it and then it goes away at high rpm.It idles rough as well. It died once but I started it back up and it continued to run. i just pulled the codes and this is what it read. 13,24,31. Could someone please tel me what they mean? thanks Michael

Does anyone know where I canget that bodykit. I have almost a identical car except my rims are 18" spinners. I think that car looks b***hin'. Michael

Sorry for all the posts guys. I have been looking for things to help all of us here. I know we have been struggling to find stuff without going to the dealer. So heres something else I found. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2453878311 Let me know what you guys think,Lexx

Also, He sells the instrument cluster repair kits. Lexx

I know we have been dealing with the climate control screen plague. I found this on ebay lastnight and i want to know if anyone has bought through this guy or what. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2452355660 Lexx

What do you guys think about this? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2453404190 Do you think this will fit? I am thinking about using the aluminum adapter and using the same style filter but in K&N. Would this set up work? Lexx

What do you guys think about these? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...gory=43118&rd=1 I am really interested in this kit. Also, it is pcocket freindly :D Do you guys know anybody that has tried these? Lexx

i ordered my 18" with a 38mm off set and they fit perfect. If you have any questions contact MHT wheels. that is the company that made my spinning wheels.My wheels are 18x8.5 and no problems here. If you need halp let me know. Lexx

Yup, the light is accurate but the guage is not! I was thinking the sending unit.

About a week ago i filled my car full of gas. the guage read fine until I got home and turned off my car. I them got back in it after 30minutes and i noticed that my fuel guage read empty. i thought I was trippin' , so I checked for leaks and nothing. So i then went back to the gas station and pumped .40 cents into my tank and it was full. i said screw it and drove like that all week untill i almost ran out of gas. When it almost ran out of gas the orage light(low fuel) was on. What should i do? LEXX

I didnt know iridium is oem! I have denso platinium in my 91. Can I add iridium in my 91???? 396

I have hid's now and they are not fully purple like the bmw's x5. Mine are slightly purple. Where do I get a purple hid kit like the x5's? If anyone knows please post a site and let me know. Thanks LEXX

I ran silverstars in my car and I loved them untill I got my Hid's. Hid's are unbelivable. I light up the whole freeway. I will never go back to a regular bulb.This is just my opinion. LEXX

I am glad to see that we saved you $100 ;) i think thats why we are all on this forum ;) LEXX

I run carebon metallic on my ls and I havent had no problems. I have about 9,000 miles on them.

Open the trunk. Look at the driverside trunk hinge. Pull the black plastic down. There will be some wires in there. You may need to look further back close to the gas tank. The wires are going to be white. i believe there are 3 white ones the break. Just crimp them together with a butt connector and your done. if you need anymore advice just let me know. Lexx

I looked at a ls with 20's and it sat too high for me. i put 18 inch DUB spinners on my ls and it look killer! I personally think 19's are the way to go on the older ls models. If you have a 430 then you better put 20's on it. It has a bigger wheel well and they look B****in. Jusss my lol ole .02 pennies :D LEXX

Obergc you are exactly right! Mine did that last year and I took it to the dealer and they charged me $110 to find that little problem. i fixed it in 5 minutes. it will also make the transmission go into fail-safe made and downshif while your driving.