Jump to content


bsouth123

Regular Member
  • Posts

    18
  • Joined

  • Last visited

Profile Information

  • Lexus Model
    Ls400

bsouth123's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator Rare
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Dan. Thanks for the advice. I'll give that a try.
  2. I'm getting error 71. Today I cleaned throttle body and I'm still getting error 71. Any ideas on what else I need to do? Thanks
  3. Just to give everyone a heads up... Crutchfield.com has a sell on the Polk Audio db 501 5" 2-way Speakers that fit the ls400. Buy one get one half off.
  4. Both of my wheel bearings are out in the front and I want to fix this weekend and I need a little help. Does anyone have a tutorial on this? What about a PDf? Also, has anyone taken the bearing down to a local shop for pressing? Thanks I have a 92 ls400
  5. is it milky white? If so, you have oil mixing in with the antifreeze....
  6. Yup, took it apart and the gear that touches the motor has been shortened over the years...It does not fit tight anymore..
  7. Mine is doing this and would like to hear why.....Also, when braking the front end drops quite a bit like the back brakes are not even working...
  8. can you post the link please? Thermactor, can you post the link PLEASE! I found it guys.... It's the same place I shop. 30% off of retail. It is under "Bodt Hardware" http://www.trademotion.com/partlocator/ind...amp;catalogid=0 bsouth123, I drilled down for a 2001 LS430.. nothing under Body Parts... Try this.... 2001 Lexus Ls430 Body Hardware ----Trunk----Lift cylinder
  9. can you post the link please? Thermactor, can you post the link PLEASE! I found it guys.... It's the same place I shop. 30% off of retail. It is under "Bodt Hardware" http://www.trademotion.com/partlocator/ind...amp;catalogid=0
  10. Well my gears in the Power antenna are stripped and I need a new one. I found a new OEM version for $215. I started to search for a 1992 Camry part and it is HALF! Will it work??
  11. Just sent you an email. I used http://www.arnottindustries.com/ Works great!
  12. Hello everyone! I need a good service manual and was wondering what everyone thought between paper back or CD? The paper back is $200 and the CD is $2. Big difference! What is everyone using??
  13. I found it... You have to remove the wood grain and the the buttons pop up, once you have them out you can see the bulb on the side. I've got the part number somewhere if you need it for the bulbs.
  14. I would also like to klnow this...same problem with the strut.
  15. Anyone know how to get the bulb out of this switch? Thanks...
×
×
  • Create New...

Forums


News


Membership