Jump to content


riz

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Profile Information

  • Lexus Model
    ES 300

riz's Achievements

Progressing

Progressing (3/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Thank You very much for your help, yes I did it and it worked out really well. From the first look I did not saw the "split" between them but when I bought the bushings thats when I knew about the split. In the picture I thought the split was there because they were damaged. Thanks it worked out really well.
  2. How do u do that. I have the same exact problem and my bushings are worn . How can you replace them , Do you have to remove the entire sway bar to slide off the bushing from the ends or can u just open the bracket and change it. Please PM me as I am quite desperate to fix this problem. Would u kindly describe the procedure as per the picture I am attaching . Thanks
  3. I went to the dealer today because I had this thumping noise coming from the rear , I read some where on the forum about some one describing that noise like carrying golf balls in the trunk(i could,nt find that post), it also had the picture of two sway bar bushings. Can any one plese describe the procedure to change them , I have the factory service manual . but I am not understanding how will I remove the bushings themself. Do I need to remove the entire stabilizer bar and slide off the bushing or do I just need to remove the bracket to remove the bushing. I am sorry I never used forums before, so pardon my entiquettes. Rizwan Ahmed
  4. I did seafoam my car today , and right after I got done i saw that my CHECK ENGINE light is on . I disconnect and reconnected the battery to clear the code. So far I have seen improvement in response.
  5. I am a senior Electrical Engineering student at Sate University of New York at Buffalo. Looking for a job. prior to university I served in the US Navy for four years as Electrician. I work part time in an instrument calibration firm as an intern. If any one has a job for me , email me at rizwanahmed11@hotmail.com for my resume. Please.....
  6. Changing the H7 bulb is very easy. When I bought my lesus two weeks ago , I was very frustated because I was not even able to change the light bulb. but here is how to do it . (lexus ES 300 97 to I think 01) 1. Open the Hood :P 2. disconnect the cable going to the H7 Bulb. 3. You will a black circular rubber cover with two tabs, (one on top and one at the bottom of the cover) 4. remove the cover by jiggling the two tabs. 5. Inside u will see the bulb holder which in held by a metal clip. 6. remove the clip and gently slide out the bulb . 7. inser the new bulb crefully into the bulb holder(or socket)with the base without touching the actual glass itself. 8. place the bulb holder into the hole while keeping in mind the direction (top or bottom). Secure it with the clip. 9. Insatll the rubber cover the way it was before , reconnect the cable , and test the light. Thanks Rizwan
×
×
  • Create New...

Forums


News


Membership