dfire9

My ES comes with of course 205-65-15 and i wanted to see if anyone sees any problem putting a 195-60-15 tire on the car. Please let me know want to get these tires this weekend. Thanks in advance

yep, best to use new/clean DOT3 and not from a bottle that has been open for sometime. steviej Cool thanks i will go get brand new bottle

If iam going to top off brake fluid can i just use any DOT 3 brake fluid?

Is there some where you can buy that?

Sensor 2 Alright i replaced both and light has stayed off so far . Thanks to all people who replied I really appreciate all the advice. Steviej what si the book that you are saying we should always go by to get info like sensor location etc.

Gotcha ok well one last question when going to the dealership to get parts they have been giving me an sensor that the connector does not look the same. Do the connectors vary? And is it safe to assume that if the connector is not right then it is not right sensor. What i mean is when i hold the connector in front of me there is part that snaps to hold in place on top, 2 prong line things on the left and 1 at the bottom. The part they show me has 2 on bottom an not one. So that makes me thnk they are not giving me right part.Again thanks for your help. So is there a post somewhere that has the correct posting of the codes for future? Lastly which sensor is the one behind cat?

Ok on a previous post I saw this P1153 Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 2 Sensor 1) P1155 Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1 Sensor 1) So i was thinking that the 1155 was the one near the firewall. And the P1153 was the one when you open the hood you can see it sticking out of the manifold. Is this not correct? So i replaced the one near firwall and cleaned the one right on top when you open hood.Just to make sure those are the only 2 in the front right or am i still not talking about the right one.Cause when you say move intake inlet for the sensor iam talking about i dont have to move anything i can see it as soon as i open the hood.And as far as the P0125 is there anything i cna do about that cause the ccolant temp is just right on side where you drain coolant from according to my tech book. Please let me know which one will take care of this i want to try to get part today and fix tonight. Thanksin advance. Lastly the autozone guy was saying coolant temp sensor was bad , but i dont think it is cause wouldnt that affect the temp gauge if it was not working?

Check engine light came on and it gave me code P1155 and P1153. I see what the code is so i replaced the air /fuel sensor bank 1 sensor 1 (near firewall) and reset the light. Now light came back on and it is giving me P1153 and P0125. Is this saying that the other air/fuel sensor needs to be changed or is it saying i need to replace coolant temp sensor. Someone please advise i want to get car fixed ASAP cannot stand driving with the light on.Also where is bank 2 sensor 1 is that the one right on top of the engine? It is a 1998 es300?

Well the first time i got the light check it pulled the code P0125. I reset the light to see if it would come back and it did but then pulled code P1155 which i looked and thought to be O2 sensor near firewall bank 1 sensor 1. I replaced the sensor and the light and now it has come back again. Does anyone know what this could be? It is still pulling the code P1155. Do you think this is bad sensor or do you think it is something else and if so what could it be.Now i will say that the sensor i replaced it with is Bosch sensor and the connector did not match so i had to use old connector on the previous O2 sensor. Please reply and let me know what u think. Thanks in advance.

yep, next to firewall, between cat and manifold. Ok i replaced this last night and so far on drive to work the light has not come back on. Thanks for the replies and hopefully this will kill the problem.

Ok now I had them pull the code again and and only came up with engine code P1155 which I think is o2 sensor bank 1 sensor 1. Is this the sensor that is on back side of the engine closest to the firewall?

Naw the temp gauge is normal it never goes above half way line. I replaced o2 sensor about year ago i cant imagine it going out again or is this possible. Guy at lexus dealership said to check coolant. Has anyone else ever had this problem? Thanks for replies

I was driving and engine light came on and i took up to auto zone and it is pulling code P0125. Does anyone know what this is saying needs to be replaced? Car is running normal. Also want to know is this something that will hurt car if continue to drive on it? Please advise. Thanks for your replies in advance.