Yeah, bearing is separate. I didn't do my rear sets so I'm not sure if it's the same situation (most likely). Check the schematics just to be sure and double check when ordering that the front bearings are the same as the rear. Rear mounts & seats will be different of course.
My 99 has about 49k miles, and found the front dust boots & bump stop to be ok, so I didn't order new sets. If you have higher miles, probably safe to order new dust boots/bump stops. My bottom spring insulators were bad though. I recommend you add the bottom insulators to your list. I didn't and so had to improvised. I did the change just this past Sunday and the dealer was closed so had to improvise....needed the car up and running Monday. I bought 1/2in dia heater hose, cut it about 1.5 feet length, then cut it open and wraped the bottom coil. I'll be keeping my eye out on them just in case.
Edit: Out of curiosity I checked the rear suspension components and there doesn't appear to require the bearing like the fronts. Confirm with the place you are ordering from.