godfather18

Does that do anything for performance does the 94 have more power because it has more coils?

Funny story this morning my uncle was showing me his engine on his 1994 ES300 1MZ-FE and I noticed he had 6 coils on his engine 3 front, 3 rear. But my 96ES300 has 3 coils in front and not on the rear, is there a difference in the engines or am I missing 3 coils any tips would be greatly appreciated. Toysrme please leave a post on this one.

I just replaced my inner tie rods on my 96 es300 and all four of my stabalizer bushings, now the car needs a alignment really bad does anyone where is the best place for a alignment?

Really it adds more engine pressure could it damage the headgasket?

Yeah I dont see those plugs being better than the Densos but I heard they are and last longer.

Im going to get the ground kit for sure, but not sure about the thermostat now and the plugs.

My engine runs perfect and there r no leaks and temperature is always the same.

Im thinking about doing a couple of upgrades and need some input.

1)Torque master spark plugs, saw these on L-tunedparts.com and need some advice if they would benefit me in anyway.

2)Hyper ground system, saw this as well and wanted to see if upgrading the grounds for my engine would make a difference.

3)TRD thermostat, saw this and wanted to know if this really makes the engine run a little cooler, it said 10 to 15 degrees cooler.

Heys guys every time I go over bumps my steering wheel pulls to left or right and I wanted to know if it matter what brand I could go for as replacements. I found some on ebay for $30 for the pair and need to know if anyone has had any problems replacing inner tie rods

Heys guys my car has been making a thumping noise when I go over small bumps and when I go over big bumps like speed bumps it doesnt do it. I think it could be either the control arm bushing or stabalizer bushings. Need some advice

Where did u get that buff machine from and what kind is it and where did u get the wax too?

Dude I am having the same problem right now and dont know what it is, all fuses are fine. They are located right under the volume knob next to the changer and one under the hood next to the engine right?

Hey guys I was just wondering if its good to replace the front and rear stabalizer bushings, before they start making noise?

(I can get them from Park Place Lexus for $35 shipped)Thanks

P.S.

Is there anything else I should lube or replace while Im replacing the bushings?

I'm down with fuel pressure.

What does that mean?

It means that Toysrme agrees with Skperformance that your problem is most likely a fuel pressure problem.

steviej

No, no what does the fuel pressure have to do with the car not starting instantly, and how is this problem fixed or what should be done to check the problem?

I'm down with fuel pressure.

What does that mean?

My uncle has a 1994 ES300 and it has been starting with a slight delay for about two months now and it does it after the engine has cooled. If you try to start the car and it takes like 3 seconds for it to turn on, now the engine start fine but with a delay. He has replace the plugs and wires, seafoamed the engine, intake and gas tank and it still does it. The car starts right up after it is warm, but once it cools its takes longer to start. So if anyone knows why its doing it let me know. thanks in advance

Hey guys Im looking for a HID kit for my Lexus and dont know which brand to go with becuase theres so many of them out there and I just dont know which to buy. Im looking for a pure white HID kit with a hint of blue/purple from a distance and I want it to cover a lot of the road. I heard that 6000k is a good kelvin rating and that Phillips, Osram, PIAA are good companys to buy the kits from, but I need some advice from any of u guys. Thanks in advance

Does anyone know if there is a warrenty on something like this or some kind of performance related coverage on this CD changer from LEXUS? I have 91000 miles on my car if this helps.

Are they CD's you burned at home?They will cause that sometimes.Unfortunately it might be time for an out of warranty exchange at the dealer.

Exchange?

Heys guys my cd player for my car is giving me a error sign on my LCD screen and I took the cartridge out sprayed the inside with canned air, tried giving it a couple wacks on the top of it and still a error code, so now I cant use my cd player.

Would it be possible to put a es300 2000's tail lights on a 1998 es 300.

Yes they bolt right on.

Hey guys I replaced my rear brake pads about two weeks ago and when I would drive the car when it was cold the rear of my car would make a noise where the rotors are. I thought the rotors where warped so I went today and had them cut but they still make the rubbing noise when u turn the the rotor on the car when its jacked. So I took the caliper off and moved the rotor again and still the same noise. So I took the rotor off again and it looks like the noise is coming from the e-brakes. But I dont know what to do to the e-brake to stop the noise, so I put the rotors back on and I guess Im going to have to live with the noise. Now the noise goes away after about 3 minutes off driving and braking, so I guess after the rotor warms up the e-brake doesnt touch the inside of the rotor. I hope someone has any idea what the problem or a solution to this problem.

GS300 without a doubt!

Lots of things.

Hard to say without seeing and driving the car.

When you are not braking it drives straight?

Could be bad brakes or control arms .........

It drives fine and strate, but when I brake it pulls to the left what could it be?

Heys guys I have been noticing for the past couple of weeks that my steering wheel pulls to the left when I brake. What could be causing this?

Go for it. I've seen one before, on a '92-'94 Windom in a Japanese Lexus advertisement. It looks 100X better :)

thanks alot lexusk8. just the opinion i was looking for.

Do you know where I can find that picture?

Greetings,

I am looking for input from members who have "Real World" experience

which Tire is "The Best" for all season performance (including light snow).

As we all know, what we read about a product and how it actually performs

sometimes (all too often) can be completely different, sometimes unfavorably,

hence the "Real World" clarification above.

Looking for advice on Stock tire size only (no aftermarket).

Thanks.

Good YEar Assurance

Has anyone here actually had there timing belt done at Toyota in the Jersey area?