James123456

My body, 93 Lexus GS300, was sick. The traction light came on and stayed on after driving few minutes. This happened first time when I was driving back from Chicago to Toronto. I thought it was normal because of the heavy snow. but it keep doing so after. May I have your advise? ThX! :o

I just done the the calliper change on my 93Gs300. When I start the engine, The traction light turns on and Parking brake light stay on. I did bleeding on the line. Any body has that problem before?

I send Pic. and instructions to mjh_sdh@netzero.net and to twin turbo If U wand to reach the light bulbs just A. turn it over, remove back cover by unscrewing 6 screws. B. Until now, you will see a circle board and you can reach 2/3 of the bulbs. C. There are still some bulbs under the circle board. There are 6 holding screws in the middle and 5 connecting bolts on each side. (Sorry, I already put it back without taking pic. at back.) D. You have to disconnect a small 8 wire comb cable on your left bottom. E. Flip up the circle board (not remove because there are more connecting cables on your top side. F. Now you can reach all the bulbs or other parts and do whatever U want! G. To remove bulb, you just turn the bulb base count clockwise for 45, then pull out the base. Now you can pull out the bulb from the base. H. There are 3 kinds of bulb base, same size but different color. Black for indicator light (ABS, Check Engine, etc.), Blue for meter background light. Light bulb is different. You take bulb out, go to AutoZone, You will get one. I get one pack for $3 from Canadian Tire. I. Installation is easy, 5 mins. J. There are 3 cables connecting the meter at back. You have to press the tab down ( one tab for each connector) to pull out the male connector.

I got it done last night. I'll thank "TurboGS300" first, then show U step by step by picture. Pic. A and Pic. B show U where do you put your flat screwdriver without damege the parts. Because there are two slots there for you to insert your screw driver, refer to pic C. then I did what he said and I'm done. Pic. D show u where are the 4 screws to hold the meter. Good luck! Sorry, the pic is 460K. I can't upload it. If u need, tell me ur E-mail. I 'll sent U via e-mail.

I'll try

Thanks!

Another one

I got this manu from somebody, I gona share with you guys. basicinspection.pdf

Thanks, GuyTelefunken I'll try!

I have 93 GS300. the idle speed is around 900rmp, is it too high? Anybody knows how to adjust it down to 750? Thanks!!!

My 93 GS300 is doing 250mi per tank gas (70% city). Is that normal or too low? What can I do? I was trying adjust headlight aiming, but I don't kow which screw is for vertical adjustment. Anybody can helpme out? Thx in advance!