Jump to content

stanleybg

Regular Member
  • Posts

    3
  • Joined

  • Last visited

Contact Methods

  • First Name
    Stanislav

Profile Information

  • Lexus Model
    Rx300
  • Lexus Year
    2002

stanleybg's Achievements

Member

Member (1/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Valvebody need to be changed with new one.Or with sonax full upgrades one.I changed it.No it is changing very good , but i rebuild all the transmission with this.Without touching the converter.All rebuild i have done is with OEM parts.About 4000$.I rebuild it by myself.With amsoil , two sensors and all transmission cables are changed with new OEM.Every !Removed! thing :). But still when i release the gas pedal and then press it it slams a little especialy on hot engine and tranny.I think somethink in converter is bad.
  2. Yes i saw it was long time ago 🙂 I think torque converter is not properly working and it is loading the engine too much.The only think that i did not touch was the converter it self.I should send it to be remanifactured or replaced.may be i will wait until it starts making sound or some problems and then will do the converter.Or the easyest way is to modifi steering sensor to high up rpms.I think if disconect it it will keep rpms high.On other car i did this and it works.
  3. I have the same problem , but i think the sound is because of low idle.I changed all 4 engine mounts , and IAC valve with brand new OEM and no any difference at all.I think the exhaust could be the problem.All intake gaskets i changed them with new OEM ones and nothing.MAF readings are 3mg wich i think is normal.What MAF readings you have on warm and idle ? I have LPG system installed and it is doing this on both fuels.That means not an injector issue.
×
×
  • Create New...

Forums


News


Membership