Jump to content


BLOZUP

Regular Member
  • Posts

    9
  • Joined

  • Last visited

Posts posted by BLOZUP

  1. So I replaced the driver's door over a year ago. The passenger more recently. Now the drive door is acting up again. Just like Chops mentions, when hot out it doesn't work. When colder it tends to work.

    Had I mailed back my "core" to the eBay seller that I purchased both actuators from I would have had a lifetime warranty. Whoops. I'll try replacing just the motor this time.

    IIRC, it took me about an hour to do the driver's door the first time. 30 minutes for the passenger side. However, I do have to disassemble the actuator itself to replace the motor but $5 < $170.

  2. I've done both front doors, as they both eventually died. I used a $170 replacement on eBay, but it looks like you can just replace the electric motor for a lot less according to another poster above. It only takes a couple hours. Hardest part is wiggling the assembly out of the door.

    What I can recall from memory:

    Remove the door panel (I've seen other how-tos on doing this) and weather shield

    Remove 2-3 bolts holding the actuator assembly to the door frame

    Remove the 3 bolts holding the jamb on

    Reach up in the door and disconnect the outer door handle

    Disconnect the electrical harness

    Wiggle the entire assembly out

×
×
  • Create New...

Forums


News


Membership