Ross321
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Articles
Videos
News & Articles
Posts posted by Ross321
-
-
I replaced the bulbs on my RX330 fog lights. Initially I'm seeing a hotspot that I'd like to spread out so the beam pattern is more low and wide. I have not looked at the available adjustment screws yet; I expect there will be left-right, up-down adjustment, but what I really need to know is if there is any beam pattern adjustment?
thanks,
Ross
-
The diameter of the lens
-
I'm looking at replacing the low beam projector with a Morimoto D2S 5.0. That projector comes in both a 3" and 2.5" lens size. I'd like to get the 3" (more light), but if it won't fit then of course I don't want to find that out when in the middle of replacement...
Do you know if the stock low beam projectors are 2.5 or 3 inch lenses?
Thanks
-
I've replaced both low and high beam headlight bulbs in my RX330. The high beams are fantastic. Low beams are pathetic.
I've tried 3 different brands of bulbs, and both LED and HID. They have all been poor. I'm wondering if maybe the lens over the low beams might be fogged? Since it's not clear glass, it's difficult to say... I was wondering if there is a known issue with the RX330 low beams? If anyone else has experienced this, and can share their thoughts or ideally their solution?
Adjusting Fog Light Beam Pattern
in 04 - 09 Lexus RX330 / RX350 / RX400h
Posted
Right. I was hoping though that there was an adjustment that either moved the light source, or the reflectors. I'm afraid that up/down right/left will be all there is.
I'll dig into it after work and see what I can find. I was just hoping someone had previously discovered a focal adjustment, and they would pass that on