kpat

a 95 with 195000 on the clock and still running...

had the same issue on my 95 and the dogbone was damaged and replacing the mount made it shift much smoother now...

I had the same problem on my 95 Es and changing the bulb did it for now...

This is something I found out by doing the p/s fluid change yesterday with a regular dexron III tranny fluid by castrol. To be accurate I disconnected the very first thick pipe on the left as you are looking in to from the passenger side panel, then I had a pump that cost me $ 5.99 from a big lots and I siphoned the fluid through the pipe that I took off from the resorvoir till I got the new red looking fluid in the discharge pan. The pump I had has an adapter provided to put on the pipe that came off the tank and It took about 15 to 20 minutes to do this. very important to know that keep the resorvoir topped up while you are pumping the fluid out... hope this helps somebody out there like me.....

I thank you for the reply but the a/c was turned off and it still did turn on

I am sorry if this sounds stupid but does the radiator fan come on or stay on as soon as you turn the engine on if not then what could be the problem as the temperature seems normal and the revs seems normal too help !!!!!!!!!!!!!!

I had the same problem and the first thing I did was just changed the pcv valve and not that I knew but I did not change it for a long time and that cured the problem for me ...............worth a shot

I do not know if this would help but try the rubber hangers that holds the exhaust as I had one of them missed out when the rear peice was replaced and cured it but putting the exhaust in through the rubber

On my 95 Es i was trying to program the key to lock and unlock the doors thinking that it was the battery on the remote and after a lot of struggle and following the steps suggested on the forums no luck... and then I checked all the door switches as the idiot light on the cluster showed up as aa open door...bingo! after taking the rubber boot out i found the switch broken and as soon as i took the plastic peice and the contacts out of the place the keys started working too... now i need to know how to fix the broken switch if somebody knows please let me know.....

Just a wild guess but try a carbon fibre looking patch you get. that would look better then the carpeted look and may be it would look a lot different then you imagined