CheamSoft

Thank you for the post. I just have replaced the rear right(passenger) side wheel hub & bearing assy following this post. The hardest part was to separate 'Rear Axle Carrier Subassy' and 'Rear Axle Hub & Bearing Assy'. I loosened hub and axle by following this post, hitting hard on spindle through Ball Peen Hammer. But after the axle and hub were loosened (you will know it's completely loosened when the axle does not move in any further but bounce back again after hit), still hub won't come out sticking to Carrier Subassy. I used a pry wrench to separate those. When you look down from top side, there will be a small gap between those two parts. Just put the pry into between the gap and pull hard towards you using it as a leverage. My RX330 is quiet again. Good luck guys.