sandelin85

hey SKPperformance... sorry i PMed you. didnt read further down where you said not to.. my bad... was just wondering if you had a DIY for replacing the bulbs behind the climate control and the climate knobs for a 94 es300. if not just something similar that i could look off of to follow it. was trying to replace the bulbs behind the climate cluster with LEDs. i searched for this for a few days but never found it i saw it for an older GS i thought but dont remember where or even if it was this site. any help or info or links would be greatly appreciated. i know how to reomve the cluster just wondering basically how to remove and install the bulbs and what exact type or number bulbs i would need so i can order. only write up ive found is for gauge cluster.. will do that also but dont need help with that as i am trying to make all main lights white LEDs instead of that dull green in the climate and temp backlight. any help would be greatly appreciated. THANKS.....

does anyone have a DIY or a link to this, on replacing the light bulbs behind the climate control with LEDs. i have an aftermarket radio and dont need to replace radio lights if thats even possible. I just need to replace the bulbs in the climate control on my 94 es300. was just wondering what number bulbs. i know how to remove center console to get the radio and climate and all that out, but i just dont know where to go from here and if there is any exact directions that need to be followed. saw it done on an older GS in a forum but not sure which site or topic it was under. I searched for the past few days and cant remember where i saw this. Any help or any links would be greatly appreciated. i am goin to replace the lights in my speedometer cluster and make those leds. i already have that write up. now just looking for the write up or DIY on the center console where the climate lights are. ive found an IS write up so i am sure it is similar. but i just want to make sure i order the right LED bulbs and also get my self a few extra. Thanks in advance to anyone that can help me out with this.... ill check back later to see if anyone has some good info for me (cross my fingers) trying to go all white instead of that dull green color......

thanks will try that in the AM and hope that it fixes it.. will post results. both hazards blink normal speed though would that matter? what i am asking is if my one blinker blinks fast and my hazard with the same blinker on the side that blinks fast, blinks at the normal speed could it still be corrosion or the weak connection or spring? let me know and hopefully it gets fixed when i try tomorrow. thanks

ok ill check. hope its not that if its expensive. what would have to be fixed if it is that? i went to check my light today and i cant seem to find where the turn signal light gets inserted into the headlight so i can take it out. does anyone know. all i see is headlight and high beam from just looking at it from the top. i will do some research and see what i can find but any info would help. Thanks.......

"If your status is New Club Member then you are not allowed to post in this forum. You must make a contribution to the forums before you can post here. When you have made enough posts, your status will change, and you will be allowed to post. This has become necessary due to the number of people registering purely to sell, and not contributing to our community"

"If your status is New Club Member then you are not allowed to post in this forum. You must make a contribution to the forums before you can post here. When you have made enough posts, your status will change, and you will be allowed to post. This has become necessary due to the number of people registering purely to sell, and not contributing to our community"

what year is your es300?

i have a 94 es300 and my right blinker blinks faster than the left one. left one operates at normal speed. ive looked around and many people say it is a bad bulb on your right side somewhere but ive checked numerous times. i had a light out in the right rear that was a brake light. i replaced this and now all lights are working properly. still flashing fast on the right. my hazards blink at normal speed so i am puzzled. all bulbs work fine tho and i just dont know what to do next or what to check next? i also read u could have some corrosion in one of your light bulb socket connectors that could cause it to not receive proper current in the bulb. so i am goin to check this out and see if thats the case or not hopefully it is and all is fixed. ive also been doing research about flasher relays. could it possibly be that? any help would be greatly appreciated as i probably will have to go to a mechanic to fix if all my things that i try dont work. i am just trying to save some money as it seems like something that is not that hard to diagnose or fix but i could be wrong haha.... i will be checking for corrosion tomorrow..... also if the turn signal fuse is bad or out the signals wont work correct which is what i thought. ill check that tomorrow too but just wondering if that would be the case. lastly, i also read it could be a bulb that is about to blow so check all your bulbs to see. i will be doing this tomorrow with a few other things so ill be back then. thanks in advance to anyone that has any answers....