Jump to content

kcode

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Contact Methods

  • First Name
    Ivan

Profile Information

  • Gender
    Male
  • Lexus Model
    SC300
  • Lexus Year
    1992

kcode's Achievements

Progressing

Progressing (3/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. Hi everyone I have a problem I can not figure out, I have read through all the post and tried the suggestions , but still not working. The problem is the idle, it starts out at 1300 and climbs as the engine warms up. I have swapped the ICV and TCV and no changes. The sc is a 1992 and the engine and ecu are from a 1995. Both cars are 5 speeds. the 1995 engine is from a wreck that I bought about 15 plus years ago, it has been in storage. It has about 20,000 miles on it. Do you think the ECU could be giving me this problem?? I am really lost, as what to do, I need help!! I am about ready to put the old engine back in. Thanks you Ivan
  2. I was thinking of that, cutting the alt wiring out of the older harness. I found the connector plug on ebay. Yes I will not run the engine until I get the alt wired up, I just am not to sure how the correct way is to do that. I will read the post that you sent. Thank you so much for the help.
  3. I got it running tonight. I am not to sure but I think I had a bad ground. Not I just need to wire up the Alternator, any advise would help.
  4. Anyone have any idea, I am just guessing as what to do. Thank you
  5. Will a 1995 engine harness work in a 1992 car? I was thinking this could be my problem? Thanks
  6. Hi First time posting here, I have learned a lot from you guys. I replaced the engine with another one I had in storage. The one in storage is a 1995 and my car is a 1992. Well everything went good except for two things so far! the biggest problem is that I cannot get it to start. I don't have the radiator installed but other than that everything is installed. The other problem is for the alternator, there is no plug from the engine harness for the voltage regulator. I hope someone can help me , I should mention that I am using the 1995 engine harness with a 1995 ecu. Can I do this or do I need to use the harness from the 1992 engine. Thanks you
×
×
  • Create New...

Forums


News


Membership