Jump to content


river

Regular Member
  • Posts

    9
  • Joined

  • Last visited

Contact Methods

  • First Name
    river

Profile Information

  • Lexus Model
    rx300
  • Lexus Year
    2000
  • Location
    Georgia (GA)

river's Achievements

Explorer

Explorer (4/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. One more question, when I refill the radiator I will be filling just the radiator (4 liter) or complete 11liter?
  2. disconnect the upper radiator hose or lower radiator hose
  3. can I change front plugs for now and change the rear one when I have some time?
  4. I thought bearing has to be pressed in to the hub via knuckle. Which meanes I have to take hub + bearing and knuckle to the pshop to get it pressed. please confirm. Thanks
  5. Thanks for the response.one of my son friend came in and after hearing the noise, shake and raving up the engine noise increased and a little smoke came from valve cover he said he smell the oil burning snd he thinks it is bad lifter making noise. What you think? Is it expensive to replace them ? Is it easy DIY? i am not driving the car and only cranked up few times just to diagnose the issue.
  6. I have es300 1996, yesterday it shuddered and start making rattling noise while I was on highway. I pulled the car and engine stooped and after that when I try to crank it crank but no start or if start it die down. I towed the car and at home i tried starting again and it sound like it is coming from alternator I took the alternator to oriel y and it was fine along with battery. so I put it back and left the serpentine belt off and cranked again on battery, same ratling noise coming on close inspection it looks like either coming from crankshaft pulley or timing belt cover (may be water pump). since Pulley IS NOT WOBBLING SO i DON'T THINK bearing or pulley is the problem. can anyone help here is the link to you tube video
  7. Can someone help me find fog light relay? Thank in advance for help
  8. Hi need help in dignosing ABS light problem. my lexus has 185k, I changed my brakes and my brakes were spongy so I did bleeding and they are fine now. but since then sometime i feel the pulsation in my brake padel (like ABS is engaging) and ABS light comes on, and goes off when i turn off the engine. took it to dealer and he dignosed that there is a code p31 - 36 (wheel sensor bad). took it to another brake shop they dignosed that ABS pump is bad. what I read somewhere in a forum it sounds like I need to bleed ABS brakes to fix it. I need help if someone can steer me in the rigth direction, and if it need ABS bleeding how much it will cost and can i do myself? Thansk in advance for help. Regards
  9. I have two questions 1. what is this ECT power button? 2. how to use OD button ? Thanks
×
×
  • Create New...

Forums


News


Membership