Jump to content

Fuel filler lid won't close


Recommended Posts


I know this is a different model but perhaps the solution with work with your vehicle with the correct part number.

 

 

Link to comment
Share on other sites

Thanks for the reply.  I had this problem with my 2004 RX, but the opening spring is fine on my 2007 RX.  It is the latching pin staying out and interfering with the closing latch..  Each time I get gas I have to open the hatch and pull the "emergency" opening strap while I push the filler door closed.  Good thing the filler door and inside release are on the same side so that I can reach them at the same time.  Annoying but fixable if I take the inside panel off.  Didn't know if there was an easier solution.

Link to comment
Share on other sites

The only other thing I could find was someone who had to replace the fuel door actuator motor because it wouldn't pull the pin back all the way.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership