Paul Cook Posted August 1, 2019 Share Posted August 1, 2019 This worked for me.聽馃榾 1. Tools - paperclip聽 2. Photo of where to install the paperclip.聽 3. Car parked on flat level surface with steering wheel turned to the straight position.聽 4. Insert key in ignition but leave "OFF". 5. Insert the paperclip in the White OBD II Port connector position shown in the photo. (located under the dash by the drivers left knee. May have a black cover.)聽 6. Turn key to "ON" position (but do not start) and observe the VSC and ABS Lamps flashing on the cluster. Wait 15 seconds. 7. Turn key to "OFF". 8. Remove the paperclip from The "White OBD" connector聽and replace the black cover. 9. Start the car. VSC and the VSC OFF Lamps should be "OFF". 10. Press the "VSC OFF" Button on the center console. Verify "VSC OFF" illuminates. Press again and verify the VSC OFF Lamp on the cluster聽goes "OFF". Hope this helps someone.聽 Paul 1 Quote Link to comment Share on other sites More sharing options...
jack lexus Posted September 13, 2022 Share Posted September 13, 2022 Paul, thank you for the tip.聽 Easy to do, worked perfect. Quote Link to comment Share on other sites More sharing options...
MAlvarezesq Posted December 2, 2023 Share Posted December 2, 2023 Thank you ONE THOUSAND TIMES!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.