EnDLesS Posted May 1, 2004 Share Posted May 1, 2004 Dear all LX 450-470 enthusiast: Since i lowered both my Lx450 & Lx470 and go with big rims n low profile rubber still dont look flush from rear fender flares. Lx450~ 23x10~ 305/35/23 with 1.5 inch wheel spacer(Billet aluminum) Lx470~ 26x10~ 305/25/26 with 1.75 in wheel spacer(Billet aluminum) And now the problem is when i look the car form the back, the rear right side just flush(even) with fender flares which i like the way it looks :D But the left rear it seems i dont understand it just way too much in, is it the way the LX set up from the factory or can i just adjust the rear lateral rod to make it look flush ??? :( Do u guys know how to adjust rear lateral rod to make it even ??? Regards, Thanks LXM4N14Cz Quote Link to comment Share on other sites More sharing options...
dougjohn Posted May 3, 2004 Share Posted May 3, 2004 I know some guys with a similar problem -- but for the opposite reason. When lifting a 450, the axle sifts in the opposite direction of what you described. I think either a new panhard rod or a new adjustable panhard rod should solve your problem. The new panhard will shift the axle back into the proper location. Lowering such a capable offroad rig like the LX 450??? :chairshot: How shameful! ;) Hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.