gnguru Posted June 25, 2017 Share Posted June 25, 2017 I recently had to replace the inside driver's door handle on my 1992 SC 400. OEM part and now the power door lock won't open completely to make the door open from both the inside and outside. If you push the lock to the unlock position with your finger the door will open. The lock moves when using the remote but just not far enough to unlock. The lock part works fine. Can anyone tell me what could possibly be wrong? Quote Link to comment Share on other sites More sharing options...
TrevC Posted June 26, 2017 Share Posted June 26, 2017 Possibly some linkage not reattached correctly after replacing the handle? Quote Link to comment Share on other sites More sharing options...
gnguru Posted June 26, 2017 Author Share Posted June 26, 2017 Nope - There are only two cables connecting to the door handle (one for the door and one for the lock and they are impossible to reverse because of the end connectors) and no other parts to the linkage. Quote Link to comment Share on other sites More sharing options...
TrevC Posted June 27, 2017 Share Posted June 27, 2017 the only other thing is whether the lever where the cables attach is slightly longer which is not allowing the lock to move over enough? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.