Jump to content


92 Sc400


bassmeister

Recommended Posts

I have a loss of power problem. Seems that car idles rough and has no power to go. Checked coils and they seem to have the same readings with an ohm meter testing primary and secondary. We tested the Voltage output from the ICU's that supply power to the coils. The one to driver side coil has 12 v at the wires that come from the 5 blade connector. The passenger side has no voltage at the 4 blade connector wires that feed that coil. The ICU's are on driver side stacked on top of each other. Where does the power that supplies the ICU's come from? Is there an control relay from the ignition system that supplies the two units?

Thanks for any help in this matter Scott

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership