Jump to content


Brake Adjustment


nunu

Recommended Posts


crawl?? up under the car and tighten up on the nut holding the 2 brake cables(actually one in a loop) to the rear hubs--will be somewhere behind the transmission. Just follow the cables going forward !!!

Link to comment
Share on other sites

PARKING BRAKE

1) Count clicks while pulling parking brake lever completely

up. If 5-8 clicks are not counted, parking brake requires adjustment.

2) Raise and support vehicle. Remove rear wheels. Remove

adjuster hole plug from rear hub. Turn adjuster (expanding parking

brake shoes) until rotor binds. Turn adjuster back approximately 8

notches (until disc turns freely).

3) Install adjuster hole plug. Install rear wheels, and lower

vehicle. On ES300 model, remove console box. On all other models,

remove cup holder. On all models, loosen parking brake lock nut, and

turn adjusting nut until parking brake pull lever travel is correct.

Tighten lock nut, and install console box (ES300) or cup holder

except ES300).

Link to comment
Share on other sites

Not sure the '92 manual is for a LS--reference is made for pulling a parking brake that is mounted in the center console; not a foot operated parking brake. Unless the '92 has a handpull brake--which would appear illogicial, but I have never been in a '92--only a '93.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership