Jump to content


Moonroof Doesn't Automatically Close After Battery Replacement


Recommended Posts

I replaced my battery and my moonroof now does not seem to function in 'auto" mode. Meaning, when I depress the open or close button fully and let go, it does not automatically go to its full close/full open position. The issue is that it's hard to get it to stop perfectly in the closed position in order that it doesn't have a draft or leak water. Suggestions would be greatly appreciated.

Link to comment
Share on other sites

Close sunroof, push and hold tilt and let it go through a complete cycle, it will go down, fully open and then fully close. During the cycle do not release the switch.

Thanks James!

Paul

Link to comment
Share on other sites

  • 8 years later...
On 2/28/2021 at 10:49 AM, Poopwiggle said:

Easy fix , turn the schwoogle toggle off to the right then battery disconnect then get up on the roof and close it by force with your hands then the schoogle should noogle the poogle and you should have functioning sunroof again 

Interesting technical terms there 🙂 
I get the jist of the repair though 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership