Sign in to follow this  
WrenchBoy

Key Fob Trunk Button, Es 330

Recommended Posts

I'm a new owner of a 2004 ES 330. The Trunk Button did not seem to work on any of the Key Fobs. Tested Truck Button located to the lower left of Steering Wheel, Truck opened, which told me that the electronic truck latch worked. Tested the Glove Box 'valet' protection for the on/off to the lower left of steering wheel button, this worked as well.

Another Lexus Owner Club member suggested, hold the Key Fob Trunk Button until the truck opened. Excellent advice IT WORKED !!!

I / we kept expecting to push the Key Fob Trunk Button 'quickly' like we did for the door locks, and when that did not work, we assumed somthing was wrong.

Solution: HOLD the Key Fob Trunk Button until the Truck pops open.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Jlogo1985
      I just got a 2007 Lexus gs350 from my cousin he got a new car so the car was sitting for 5 months when I went to start it no surprise the battery was dead I called aaa to jump when he had the charger on the battery it started and everything was fine but when you shut the car off it wouldn’t start again so I had it towed to Toyota and had the battery replaced they said they changed the battery and now the alarm won’t stop going off and the key fob isn’t opening the doors or trunk when you go in the car the computer gps starts up but car won’t start or turn off alarm I changed the key fob battery before I had all the issues I’m not sure if this is the problem but Toyota could not figure it out and I just spent $400 for them to tell me good luck get out of here I was hoping you guys could help me out please!!!  
    • By Strappedforkash
      I'm ordering KYB GR-2/Excel-G's for replacement on my 2006 ES330 that has AVS .  I am replacing the mounts as well. 

      1) Is there any reason to replace the coil spring insulators and the front coil spring seats?  

      2) Does anyone sell the KYB Excel-G's fully loaded with springs for the ES330? I haven't found them. (They do show them for 2006 Camry)

      3) Will the 2006 Camry KYB excel-G fully loaded application work on the 2006 ES330?  If so, do they need to be ordered for the 4 or 6 cylinder?  They show different part numbers.

      Thanks.
    • By TreyA123
      Hello, I'm looking into weight reduction and I'm trying to figure out the weight of the trunk and hood. I plan on replacing both however I've heard from one source that their 2000 IS has a 40 pound hood, another said mine is 80lb. Its a full steel hood so I'm hoping it's heavier than 40 pounds. Thanks.
    • By TreyA123
      I was wondering if anyone knows the weight of the hood trunk and doors on a 2002 gs300. I've heard the hood is 80lb and others have said it's 40 lb. Thanks in advance.