Jump to content


94 Es300 Driver Side Door Won't Lock


Recommended Posts

Just replaced the yellow plastic clip from the actuator rod to the door handle on my 94 ES 300. Now the door acts like is locked from the inside but one can open it from the outside door handle. Any ideas ??

Link to comment
Share on other sites

I also replaced the clip on the rod from the outside door handle to the latch. There must be a second actuator rod from the inside lever that is not connected to the latch mechanism. Time to pull the door panel again.

BTW I used a hairpin style clip to secure the rod to the latch arm. I was no where near a dealer. Cost me about $0.15.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership