Jump to content

!994 Lexus Ls 400


Havoc123

Recommended Posts

Hi, its me again. I jumped the Te & Te1 and got the codes.#13, #31, #24 & #41. Do any of you know about these codes I have pulled off my car? Is their a website with instructions on replacing the MAF?

Thank you

Havoc 123

Link to comment
Share on other sites


These are OBD codes for pre 97 cars

1 Normal Condition.

2 Air Flow Meter signal.

3 Ignition signal.

4 Engine Coolant Temperature Sensor signal.

5 Oxygen Sensor.

6 RPM signal (Crank Angle Pulse).

7 Throttle Position Sensor signal.

8 Intake Air Temperature Sensor signal.

9 Vehicle Speed Sensor signal.

10 Starter signal.

11 Switch signal.

11 ECU/ECM.

12 Knock Control Sensor signal.

12 RPM signal.

13 Knock Control CPU (ECM).

13 RPM signal.

14 Turbocharger Pressure.

14 Ignition signal.

21 Oxygen Sensor.

22 Engine Coolant Temperature Sensor signal.

23 Intake Air Temperature Sensor signal.

24 Intake Air Temperature Sensor signal.

25 Air-Fuel Ratio Lean.

26 Air-Fuel Ratio Rich.

27 Sub Oxygen Sensor signal.

28 No. 2 Oxygen Sensor signal.

31 Air Flow Meter signal (Vacuum Sensor signal).

32 Air Flow Meter signal.

34 Turbocharger Pressure signal.

35 Turbocharger Pressure Sensor signal.

35 HAC Sensor signal.

41 Throttle Position Sensor signal.

42 Vehicle Speed Sensor signal.

43 Starter signal.

51 Switch signal.

52 Knock Sensor signal.

53 Knock Sensor signal.

54 Inter-cooler ECM signal.

71 EGR System.

72 Fuel Cut Solenoid signal.

78 Fuel Pump Control signal.

81 TCM Communication.

83 TCM Communication.

84 TCM Communication.

85 TCM Communication.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership