tsantoro Posted February 9, 2011 Share Posted February 9, 2011 Any suggestions as to the problem and fix? The gas cap is tight. Quote Link to comment Share on other sites More sharing options...
DMatlock Posted February 15, 2011 Share Posted February 15, 2011 Any suggestions as to the problem and fix? The gas cap is tight. I had this warning light come on after I had the valve springs replaced on my IS350 with the factory recall. Engine started shutting down and running very poorly. Took it back to the dealer and I was told that a module had come loose that the mechanic had not put on correctly. It was a quick fix and no further problems. Quote Link to comment Share on other sites More sharing options...
tsantoro Posted February 18, 2011 Author Share Posted February 18, 2011 Any suggestions as to the problem and fix? The gas cap is tight. I had this warning light come on after I had the valve springs replaced on my IS350 with the factory recall. Engine started shutting down and running very poorly. Took it back to the dealer and I was told that a module had come loose that the mechanic had not put on correctly. It was a quick fix and no further problems. Thanks, tsantoro Quote Link to comment Share on other sites More sharing options...
motorx Posted February 24, 2011 Share Posted February 24, 2011 once happend to me that VSC appeared for no reason and acceleration and turbo dissapeared. my friend told me to take off the battery for a minute to remove the error. i did it and error disapeared. Quote Link to comment Share on other sites More sharing options...
CJAY Posted April 3, 2011 Share Posted April 3, 2011 Any suggestions as to the problem and fix? The gas cap is tight. I had this warning light come on after I had the valve springs replaced on my IS350 with the factory recall. Engine started shutting down and running very poorly. Took it back to the dealer and I was told that a module had come loose that the mechanic had not put on correctly. It was a quick fix and no further problems. so since this happened after you recall, did you have to pay for anything for them to get rid of the light (fix it). Im on extended warranty and kinda afraid that it will cost me an arm a leg to fix it. Quote Link to comment Share on other sites More sharing options...
kvetty Posted April 7, 2011 Share Posted April 7, 2011 Likely an Air/ Fuel sensor. Take it to Autozone and get them to scan it for the code. That will tell you which one needs to be replaced. Quote Link to comment Share on other sites More sharing options...
CJAY Posted April 7, 2011 Share Posted April 7, 2011 Likely an Air/ Fuel sensor. Take it to Autozone and get them to scan it for the code. That will tell you which one needs to be replaced. man.. i would hate to take it to autozone but i guess im going to have to just to make sure. are there any alternative besides autozone? either way, the light turned off after i unplugged the battery and plug it back in, though i still want to make sure everything is fine. thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.