Jump to content


P1135


Recommended Posts


Have a look at this topic: p1135 In it a diagram to measure and check the sensor (or wiring harness). It's good practice to reset the ecu by unplugging battery or ecu-fuse, run the car a few miles to see if the light goes off (ECU detects correct readings).

Sidenote:

You need to be sure the AFS you got from the dealer is specific for your car. Later models AFS's are not interchangeable and resistance for heating element is different, which can trigger a CEL.

Link to comment
Share on other sites

IT ENDED UP THAT A GROUND WIRE BY THE FIREWALL WAS LOSE. I COULD NOT BELIEVE IT I CHANGED ALL THE SENSORS IN THE CAR AND EVERTHING. ONLY AFTER GETTING SO FRUSTATED I STARTED LOOKING ALL OVER THE ENGINE AND FOUND THIS WIRE LOOSE. AFTER TIGHTENING IT MY LIGHTS WENT OFF WOW SUCH A RELIEF . THANKS FOR ALL YOUR HELP

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership