Jump to content

Cv Joints


fergi

Recommended Posts

  • 2 months later...

I joined the club today and saw this note.

How long did it take you for fixing it?

I have done it a few times. It took me a couple hours each time.

Every time I sent my car in for "service" I got broken CV boots back even they were newly replaced ones (go figure). I decided to replace the axles myself.

Link to comment
Share on other sites

I have done it on The RX300, should be the same. The worst part is pulling the hub assembly away from the axle. Unbolting the lower two shock bolts allows you to move hub away from axle. Be very careful when pulling axle from transmission or you could destroy the tranny seal....Also make sure it is seated (the new axle) into the Transmission. There is a spring clip on the axle which locks the axle carrier into the tranny.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership