Knerq Posted September 1, 2010 Share Posted September 1, 2010 I ordered the replacement part off of Amazon. How do I install it myself? Quote Link to comment Share on other sites More sharing options...
cduluk Posted September 1, 2010 Share Posted September 1, 2010 I assume you are talking about the red side markers at the lower back (left and right) of the bumper? If so, you need to remove the bumper a few inches to gain access to the light units. Quote Link to comment Share on other sites More sharing options...
maseace Posted September 1, 2010 Share Posted September 1, 2010 I was able to remove the fixture from behind the bumper without removing the bumper. It was a tight fit and I had to remove the plastic panel behind the wheel well, so maybe the bumper would have been an easier route. I ordered some bulb sockets so I can add LED bulbs to the center part of the bumper light housings, wired to the marker lights. They were designed to have bulbs in them, but in the US model bulbs are not included, and the housing does not have the hole cut for the bulb socket. I'll post some pics when I get the project done. Quote Link to comment Share on other sites More sharing options...
Knerq Posted September 1, 2010 Author Share Posted September 1, 2010 Thanks - pictures would be helpful. Here's what it looks like now. Quote Link to comment Share on other sites More sharing options...
RXREY Posted September 1, 2010 Share Posted September 1, 2010 Thanks - pictures would be helpful. Here's what it looks like now. I don't understand, what happened? Quote Link to comment Share on other sites More sharing options...
SW03ES Posted September 2, 2010 Share Posted September 2, 2010 I think he wants to replace the whole lamp housing not just the bulb. You don't want to have that professionally repaired? Thats ugly as hell... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.