mrrjacobs Posted February 9, 2010 Posted February 9, 2010 Can someone explain to me how to raise my headlight angle. I am sure some of you have noticed how horribly low they point down and done this yourselves. So please explaint to possibly save a few lives(MINE, WIFE, PASSENGERS). Thanks Guys!!!
John Stanley Posted February 9, 2010 Posted February 9, 2010 Can someone explain to me how to raise my headlight angle. I am sure some of you have noticed how horribly low they point down and done this yourselves. So please explaint to possibly save a few lives(MINE, WIFE, PASSENGERS).Thanks Guys!!! I'm interested too. I may be missing something, but I haven't been able to find a thread of previous postings about this.
PakiLegacy Posted February 9, 2010 Posted February 9, 2010 Me too. Please let me know if you figure it out. I live in a dark neighborhood and at nights its hard to see more than 20 feet.
twylie Posted February 9, 2010 Posted February 9, 2010 the height adjusters for the low beams are located under the fenders about a foot back from the front of the engine bay. You need to remove the plastic engine shields and have a very long (8-10") Phillips screwdriver. Once you have removed the plastic covers, you'll see a half moon shaped "slot" that you need to insert the screwdriver into. Make sure the car is running when you do this so the auto adjusters aren't affected.
The G Man Posted February 9, 2010 Posted February 9, 2010 Personally, I dont know why all Toyota and Lexus come from the factory with the headlights adjusted to the low end of the spec. On top of what twylie said, let me also add that the screw driver's shaft have to be at least 12" or so, thats not incuding the handle. Shine a flashlight into the adjustment opening in the fender and you will see a adjustment cog, be careful when adjusting because the cog is made from soft metal and can be stripe very easily. Look in the manual to find theh location of the bubble leveler right on top of the light, I adjust mine to the top notch on the bubbler. Make sure you are park on a level ground. Good Luck
cduluk Posted February 10, 2010 Posted February 10, 2010 Personally, I dont know why all Toyota and Lexus come from the factory with the headlights adjusted to the low end of the spec. Because! :P If they didn't angle them low from the factory, they'd have to recall all their cars because 80 people out of 1,978,679 cars sold per year complained that they were blinding oncoming drivers ... just my thoughts continuing from another thread about the insanity going on with Toyota and rediculous recalls...
steviej Posted February 10, 2010 Posted February 10, 2010 Here is a PDF file. I scanned the pages from my 2006 GS300 AWD owners manual. I hope it helps any of you. steviej 2006_GS_Headlight_Adjustment.PDF
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now