Jump to content


Radio And Heater/ac Control Display Covers


bstew

Recommended Posts


You sure its not on the outside, if so then ...

Its covered with a anti reflective film. Theres no point replacing as one its very very expensive, two it will just the do same again and three it does not really work at reducing glare.

Just get some household polish and you can remove the whole lot leaving it perfect.

Link to comment
Share on other sites

  • 1 month later...
You sure its not on the outside, if so then ...

Its covered with a anti reflective film. Theres no point replacing as one its very very expensive, two it will just the do same again and three it does not really work at reducing glare.

Just get some household polish and you can remove the whole lot leaving it perfect.

Link to comment
Share on other sites

You sure its not on the outside, if so then ...

Its covered with a anti reflective film. Theres no point replacing as one its very very expensive, two it will just the do same again and three it does not really work at reducing glare.

Just get some household polish and you can remove the whole lot leaving it perfect.

Link to comment
Share on other sites

  • 2 months later...

The glass/plastic display covers on my 2002 clmate control and radio are getting spotty from the inside and am wondering if anyone has ever changed theirs.

I took the sharp corner of a razor blade, pryed at the corner and the plastic cover came out very easily and yes it was dirty on the inside. A little Windex and replaced it. There was enough adhesive left on the unit itself to hold it in place very nicely. Now the display is bright and clear.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership