Jump to content

Recommended Posts

Posted

similar to RX300, i have the es300

i just cleaned myIACV on my 01 ES300, and after driving for a few minutes the temperature starts to increase. thinking its a clamp (though i double checked all clamps are on properly), maybe clamp broke? or should i replace both the intake gasket and the rubber IACV gasket? any other way it could be leaking coolant? some sweet smelling smoke now coming from under the hood (coolant?)

also my idle is now 1000-1500 is there a way to fix that? reposition the magnet plug (read that somewhere) or will it correct itself?

anyone else have these problems?

Posted
similar to RX300, i have the es300

i just cleaned myIACV on my 01 ES300, and after driving for a few minutes the temperature starts to increase. thinking its a clamp (though i double checked all clamps are on properly), maybe clamp broke? or should i replace both the intake gasket and the rubber IACV gasket? any other way it could be leaking coolant? some sweet smelling smoke now coming from under the hood (coolant?)

also my idle is now 1000-1500 is there a way to fix that? reposition the magnet plug (read that somewhere) or will it correct itself?

anyone else have these problems?

Sounds like the IACV gasket is maybe leaking coolant into the intake where the intake air is brought in that controls the idle. Smell the exhaust, see if you have any sweet smell there. You should have none! If you cleaned the IACV properly and there are no vacuum hoses off, it should idle at a normal rate, 700 RPM give or take.

Posted
similar to RX300, i have the es300

i just cleaned myIACV on my 01 ES300, and after driving for a few minutes the temperature starts to increase. thinking its a clamp (though i double checked all clamps are on properly), maybe clamp broke? or should i replace both the intake gasket and the rubber IACV gasket? any other way it could be leaking coolant? some sweet smelling smoke now coming from under the hood (coolant?)

also my idle is now 1000-1500 is there a way to fix that? reposition the magnet plug (read that somewhere) or will it correct itself?

anyone else have these problems?

Sounds like the IACV gasket is maybe leaking coolant into the intake where the intake air is brought in that controls the idle. Smell the exhaust, see if you have any sweet smell there. You should have none! If you cleaned the IACV properly and there are no vacuum hoses off, it should idle at a normal rate, 700 RPM give or take. I adjusted the IACV adjustment on my DIL's when I replaced the IACV and it didn't seem to make hardly any difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery