margie b Posted January 8, 2009 Share Posted January 8, 2009 HOW DO YOU REPLACE THE TURN SIGNAL BULBS IN A 1993 ES300. I'VE BEEN AT IT FOR OVER AN HOUR AND STILL CAN'T FIGURE OUT HOW TO GET TO THE BULBS! Quote Link to comment Share on other sites More sharing options...
Lexusfreak Posted January 8, 2009 Share Posted January 8, 2009 HOW DO YOU REPLACE THE TURN SIGNAL BULBS IN A 1993 ES300. I'VE BEEN AT IT FOR OVER AN HOUR AND STILL CAN'T FIGURE OUT HOW TO GET TO THE BULBS! Welcome to LOC margie :) I kindly ask you to take off your caps lock.....it's considered shouting at members. Do you have the owners manual for your ES? Quote Link to comment Share on other sites More sharing options...
kingjack133 Posted January 8, 2009 Share Posted January 8, 2009 The module is accessed through the trunk? No? Quote Link to comment Share on other sites More sharing options...
garvos Posted January 8, 2009 Share Posted January 8, 2009 Is it your front or rear??? Quote Link to comment Share on other sites More sharing options...
Lexucan Posted January 8, 2009 Share Posted January 8, 2009 Most likely the front. Those are the ones ppl usually have quesitions about. If this is the case, you need to pull the headlight assemblies forward so you can access the turn signal bulbs from behind. There are three plastic tabs on each headlight assembly (left, right, and center) with screws through them which secure the assemblies to the body of the car. Remove the three screws on each and pull the assemblies forward, away from the body. Then you can get to the bulbs to replace them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.