92BlueByU Posted September 29, 2008 Share Posted September 29, 2008 I recently bought all the stuff for a tune up and all I was able to get done was the spark plugs and wires. How the hell do I get the distributor caps off? I couldnt figure out how to get the lower half of the dist. cover off. Quote Link to comment Share on other sites More sharing options...
zeus87gn Posted September 29, 2008 Share Posted September 29, 2008 I just went thru this with my newly acquired SC400. The lower covers have a cople of 10mm bolts underneath and bolted into the block horizontally. The d/s cover is relatively short, the p/s goes down across the middle of the block with 2 larger 12mm bolts in it pretty much in the middle of the engine. I had to remove the upper radiator hose and serpentine belt to gain appropriate access to get those covers off. Be careful as the coil pickup wires go thru grommets that are fitted into those covers. They also have gaskets all around. HTH, Z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.