Jump to content

Changing Low Beam & High Beams Bulbs In 1993 Es300


Recommended Posts

I am deciding to change my headlight and highbeam lights pretty soon, with these " http://cgi.ebay.com/ebaymotors/Xenon-HID-H...sspagenameZWDVW " can i get a diy on how to do it, i looked at the one ken2323 wrote on the 1998 es300, and as you know they are two different generations, so if i get a diy i would really appriciate it. :)

Link to comment
Share on other sites

I am deciding to change my headlight and highbeam lights pretty soon, with these " http://cgi.ebay.com/ebaymotors/Xenon-HID-H...sspagenameZWDVW " can i get a diy on how to do it, i looked at the one ken2323 wrote on the 1998 es300, and as you know they are two different generations, so if i get a diy i would really appriciate it. :)

Changing the headlight (bulbs) on the '93 es300 is easier than easy.

First, you need the bulbs. #9006 for the low beam(s). #9005 for the high beam(s).

I just changed the low beam(s) on mine.

I did find it easier on the passenger side to remove the windshield washer 'bottle' - first. (A couple of bolts w/10 mm heads). Less than 5 minutes.

To remove the bulb(s), unlatch the wiring harness and turn the headlamp bulb. Remove bulb.

To re-install. . . reverse procedure.

HINT: Do NOT touch the bulbs with your bare hands. The oils from your hands will cause premature bulb death.

Total time to swap out the bulbs. . . . 10 minutes, tops.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership