Al. Posted May 12, 2008 Share Posted May 12, 2008 Hi All, I own a 98 LS400 and I am considering a wheel upgrade to 20" wheels all around as follows: Wheel Size: 20x8.5 Bolt Pattern: 5x114.3 Wheel Offset: +42 Tire Size (F & R): 245-35-20 My question is do I need to roll the LIP of the fender to make this type of set up fit. Also please note that I recently upgraded my shocks to Bilstein shocks in which I do not know if it will have an adverse effect on this application or not. Thanks for your feed back Al. Quote Link to comment Share on other sites More sharing options...
jcrome04 Posted May 12, 2008 Share Posted May 12, 2008 I had 20" wheels on my old 91LS lowered almost 2" on Tanabe DF210's. Never rubbed. I forget the offset and all that technical info though.. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted May 12, 2008 Share Posted May 12, 2008 You need to make sure the wheels will fit over your brakes the offset does tno tell you. Quote Link to comment Share on other sites More sharing options...
Al. Posted May 12, 2008 Author Share Posted May 12, 2008 You need to make sure the wheels will fit over your brakes the offset does tno tell you. Thanks SKP. I am aware of this...I just need to know if the 20" will go on fine without any rubbing to fender. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted May 12, 2008 Share Posted May 12, 2008 at factory height it is fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.